Details About All American Fence

Rotted Fence Post Replacement: One of the most difficult things about fencing repair is replacing posts in a fence. I saw DIYers try everything they could to get the broken fence post out of the ground. What I refer to as the Grand Canyon is one of my favourites. This is when a DIY will dig a hole so large around the post of the fence that they almost need a cement truck to fill it with enough concrete. Have you ever dug a hole for a post for the fence? If so, use the concept of digging an 8-inch diameter hole about 2-2 1/2 feet deep for a fence post against the concrete of the old fence post.Visit All American Fence for more details.

Then take a sharp shooter shovel away from each side of the concrete to clear a little dirt. To remove the little bit of dirt that you have loosened from the post hole, use the post hole digger. You now have a deep enough hole that you can use a rock bar with a little effort to lever the broken post and concrete into the hole that you just dug so that it will be easy to lift out. Put the new pole in the hole, take the old hard concrete and use it as a filler in the hole and put in the hole as much pre-measured wet concrete as necessary to fill the ground level and then plumb the pole with a level.

You can then wait 24 hours for the concrete to harden the fence panels around the new fence post or you can go ahead to nail the old or new fence panels to it, re-level the post and then use an old fence board to support it.Cedar Fence Post: When used above ground, cedar is naturally extremely resistant to rot, decay, warping, and bugs. dog fence as an option.